Atlas Display Setting Manual

 KT-LCD6 e-Bike Display User Manual        V_1.0

Dear customer, please read this manual before you use KT-LCD6 instrument. The manual will guide you use the instrument correctly to achieve a variety of vehicle control and vehicle status displays.

Functions and Display

Instruments using the structure form of instrument body portion and the operation buttons are  designed separately.

1		UP button	9	Mil	Distance (imperial)
2		SW button		DST	Trip distance
3		DOWN button		ODO	Total distance
4		Battery capacity indicator		VOL	Battery voltage
5	TM	Single trip time	10		Backlight and headlights
	TTM	Total trip time	11		The brake display
6	KM/H	Riding speed(metric)	12	CRUISE	Cruise function display
	MPH	Riding speed (imperial)		PAS	PAS starting display
	MXS	MAX speed		THROTTLE	Turned on throttle
	AVS	Average speed	13		6KM/H push power assist
7	ASSIST	Pas level	14	MOTO ℉ ℃	Motor temperature
8		CADENCE display		MOTOR W	Motor Power
	KM	Distance(metric)	15	℉ ℃	Environment temperature

Operation

1. ON/OFF

Hold  button long to turn on the power, and hold  long for a second time to turn off the power. When the motor stops driving and when the e-bike is not used for a consecutive 5 minutes, it will automatically shut down and turn off the motor power supply.

1. Display 1

Hold  button long to start up and enter display 1.

1. Turn on backlight and headlights

    Hold  button long to turn on backlight and headlights (the controller should have headlight drive output function); hold  long again to turn off the backlight and headlights. 

1. Assist ratio gear (ASSIST) switch

    Hold  button shortly to switch 1-5 file gear. Gear 1 is for the minimum power, gear 5 is for the highest power. Each startup will automatically restore the gear shutdown last time (the user can set randomly). Gear 0 is

without booster function.

1. 6KM/H power assistant push function

    Hold  button and  flashes, the vehicle drives at the speed not more than 6Km /h. Release  button, the function is invalid. 

1. Cruise function(CRUISE)

    After the cruise function is turned on, the trip riding speed is greater than

7 km/ h, hold  button long and enter cruise, the CRUISE lit. Brake or hold any button to cancel.

1. Turned on throttle (THROTTLE)

    Turned on throttle, the display interface shows THROTTLE.

1. Power-assist startup 

    When the booster riding, the display interface shows PAS.

1. Cadence function display                                              

    In the assistance mode, the display will show the pedal's Revolutions Per Minute (RPM).

1. Brake status display

    When the brake, the brake state is displayed

1. Battery Capacity Indicator

    The meter can automatically identify 24V, 36V, 48V battery capacities when it is supporting use with the specified controller. When the battery capacity is over 70%, the four power displays of the meter are lit, when the

battery capacities drop, the four power displays are off in order, when the power capacity is less than 15%, the four power displays are totally turned off. When the controller is power off due to voltage shortage, the power display frame flashes, indicating the vehicle has been in voltage shortage and waiting for shutdown currently.

    After power on for 5 seconds, hold  and  at the same time, single trip riding time (TM) and single trip distance (DST) flash, hold  button shortly, the content of both is cleared. If failed holding the button within 5 seconds, it will automatically return the display interface after 5 seconds, original content is

Hold  button shortly in display 1 to enter display 2. In the riding mode after 5 seconds, display 2 automatically jump to display 3.

                       Hold      button shortly in display 2 to enter display 4.                        In the riding mode after 5 seconds, display 4 automatically                        jump to display 5.

1. In each display interface, if you hold           button long, the meter will be powered-off together with that of the controller.
2. Automatically prompt interface
   1. Error Code Display    Error Code                     Definition     01＿info  Throttle Abnormality

                                                   03＿info         Motor hall signal Abnormality

    05＿info   Axis speed sensor Abnormality(only applied to torque sensor)     06＿info   Motor or controller has short circuit Abnormality Electronic control system failure will display (flashing) fault code. Once the

fault was removed, it automatically exits from the fault code display interface.

1. Motor temperature alarm

When the motor temperature (the internal motor should be equipped with the temperature sensor and the output of temperature detection signal) is over the warning value, MOTOR ℃ (℉) flashes to alarm at any display, meanwhile the motor controller will offer the appropriate protection to motor.

Outline Drawings and Dimensions

1. Outline dimensions and Mounting dimensions of double brackets   2. Dimensions of button box