Summit Speed Settings

Summit Speed Settings

1. Press the +, -, and wrench buttons at the same time until PSD00 displays at the bottom right side of the screen.
2. Press the – button until PSD78 displays on the bottom right side of the screen 
3. Using the wrench button, scroll through the settings and stop at the speed setting SP_ _
4. Press the + button until the speed is at SP40 (MAX SPEED)
5. Press the wrench button to set the speed.
6. Power off the bike, and then power it back on to test speed.

Note: To change the voltage setting, after the PSD is set to 78 (PSD78) scroll through the settings and stop at VOL_ _

The recommended speed setting will be 36 or 48.